|
|
 |
Edge Products - Performance Tuning Product Mounts by ARKON
Arkon offers a full line of aftermarket car mounts designed for use with Edge Products'
all new CS and CTS Evoluion programmers. Ordering information shown below.
The CS and CTS products connect directly into the vehicle’s computer via the OBDII/diagnostic port and can read and display up to 8 parameters at a time from a list of dozens of engine parameters. CS and CTS displays can be easily changed and configured to allow each user to view the data most important to them.
User Manuals for mount bundles listed on this page:
CM011-2, GN014-SBH, CM089-LS-2, CM088-TS-2,
GN047-SBH, CM033-G-2, CM048-2, AP032-VSM
All brand names mentioned herein are the property of their respective owners.
|
|
 |
|
 |
|
 |
|
| CM011-2 : Sun Visor Mount with Dual T-Tab Pattern |
|
- Recommended installation location is on far left of passenger side Sun Visor
- Compatible with All Magellan Maestro, RoadMate, and Crossover devices having DUAL T Slot pattern
- Compatible with ALL HP iPAQ rx5900 and 300 series GPS Travel Companion
- Compatible with Edge Products CS and CTS Evolution Tuning Programmers
- An ideal alternative mount for California and Minnesota drivers where windshield mounts are banned
- Sun Visor mount location is somewhat hidden thereby reducing chance of stolen GPS or car break-in
- Easy to install. No tools required. Slides on to your Sun Visor with ease.
- Conveniently fits in your pocket making it the perfect travel accessory for mounting your GPS
- Easily transferred from one vehicle to another
- Can be used on driver side sun visor, but not recommended as the driver's side sun visor blocks the view of the road. Mount to the far left side of the passenger side sun visor for maximum visibility, even when the GPS car charger is connected to the device.
- Do not connect your GPS car charger to the device in the Sun Visor mount if the car charger cord is within the airbag deployement zone
- Patented
View the USER MANUAL for this product for complete specifications and installation instructions. |
|
|
|
|
|
| Previously: $17.95 |
|
| Sale: $9.95 |
 |
|
 |
|
 |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
| |
 |
|
| GN014-SBH : Travelmount® Deluxe Mini Windshield Suction Pedestal with Dual T-Tab SBH Head |
|
- Compatible with All Arkon Dual T-Slot holders and adapter plates (sold separately)
- Compatible with Edge Products CS and CTS Evolution tuning programmers (sold separately)
- Ideal for use with any devices that feature Arkon's Dual T-Slot pattern
- Extemely compact, unobtrusive mounting pedestal
- 360° swivel ball head series (SBH) accommodates vertical and horizontal positioning
- Installs easily without tools
- 70mm Suction Base - Use with AP013 70mm adhesive console mount disc (sold separately)
- Extremely low vibration
- 70mm PVC suction provides maximum connection to car's windshield
- Easily transferred from one vehicle to another
- Patent Pending
Do not install Arkon products over an air bag cover or within the air bag
deployment zone.
View the USER MANUAL for this product for complete specifications and installation instructions. |
|
|
|
|
|
|
|
| Price: $14.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
|
 |
|
| GN010-SBH : Mini Adhesive Console Mounting Pedestal with SBH Dual T-Tab Head | 1/2” Tall |
|
Your's car's console is a terrific area for mounting your cell phone, smartphone, or other electronic device. Arkon's GN010-SBH is designed to attach to any flat, vertically positioned surface in your car, home, or office.
Ideal mounting areas include the portion of the dashboard's bezel located near and around the car radio location. GN010-SBH adheres to those flat surfaces and provides an unobtrusive support for phone holders or cradles (sold separately).
Note: This version is not a complete solution by itself unless you're mounting a Garmin GPS having the 17mm swivel ball pattern or if your device came with a holder that features Arkon's Dual T-Slot mounting pattern.
- Compatible with All Arkon Dual T-Slot holders and adapter plates (sold separately)
- Compatible with Edge Products CS and CTS Evolution tuning programmers (sold separately)
- Ideal for use with any devices that feature Arkon's Dual T-Slot pattern
- Extemely compact, unobtrusive mounting pedestal
- 360° swivel ball head series (SBH) accommodates vertical and horizontal positioning
- Installs easily without tools
- Let adhesive cure for 24 hours prior to use
Do not install Arkon products over an air bag cover or within the air bag
deployment zone.
View the USER MANUAL for this product for complete specifications and installation instructions. |
|
|
|
|
|
|
|
| Price: $7.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
| |
 |
|
| CM089-STL-2 : Low Vibration Flexible Gooseneck Windshield Suction Pedestal with Dual T-Tab Head |
|
- Compatible with All Arkon Dual T-Slot holders and adapter plates (sold separately)
- Compatible with Edge Products CS and CTS Evolution tuning programmers (sold separately)
- Ideal for use with any devices that feature Arkon's Dual T-Slot pattern
- Pedestal length is approximately 8”
- A high-performance gooseneck style windshield suction pedestal
- Adjusts to accommodate a variety of viewing positions
- Installs easily without tools
- 70mm suction base
- Easily transferred from one vehicle to another
View the USER MANUAL for this product for complete specifications and installation instructions. |
|
|
|
|
|
| Previously: $19.95 |
|
| Sale: $14.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
|
 |
|
| CM088-TS-2 : 15” Flexible Steel Gooseneck Swivel Floor Mount Pedestal with Dual T-Tab Pattern |
|
- Installs to the passenger-side seat bolt
- Compatible with most vehicles
- Adjusts to accommodate a variety of viewing positions
- Ideal for use with portable devices that use Arkon's Dual T slot pattern
- Compatible with Edge Products CS and CTS Evolution tuning programmers
- Warning: This solution does not position the navigation device in an optimal viewing location in most vehicles. Users must rely on voice commands from GPS device rather than viewing device in mount while driving.
- Easily transferred from one vehicle to
another (tools required)
View the USER MANUAL for this product for complete specifications and installation instructions. |
|
|
|
|
|
| Previously: $24.95 |
|
| Sale: $17.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
| |
 |
|
| GN047-SBH : Removable Air Vent Mounting Pedestal with Dual T-Tab SBH Head |
|
Arkon's GN047-SBH Mount is a breakthrough in mounting technology. It features Arkon's removable swivel air vent pedestal.
The removable air vent pedestal can be moved easily from vehicle to vehicle without damaging your vents, when used properly. It's the perfect travel companion. This solution is designed for use only with vehicle's having horizontal air vent louvres.
Compatible with Edge Products CS and CTS Evolution tuning programmers
Warning, Do not try to remove your device and air vent mount from the air vent by pulling with outward force on the vents. It's essential that you remove the entire solution using the REMOVABLE vent clips.
Do not install Arkon products over an air bag cover or within the air bag
deployment zone. Arkon Resources, Inc. assumes no responsibility of liability
for injury or death as a result of car crashes and/or air bag deployment.
Arkon Resources, Inc. is not responsible for any damages caused to your car air vents,
your device, or yourself due to the installation or use of the pedestal mount.
Patent Pending
View the USER MANUAL for this product for complete specifications and installation instructions. |
|
|
|
|
|
|
|
| Price: $14.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
|
 |
|
| CM033-G-2 : Flexible Gooseneck Cup Holder Mount with Dual T Pattern |
|
Mount any device that features Arkon's Dual T-Slot pattern in your car's cup holder opening.
- Compatible with Edge Products' CS and CTS Evolution programmers
- Compatible with Arkon SM020-2 and SM015-2 moible phone cradles
- Compatible with Arkon CM090-2 Universal PDA cradle
- Conveniently fits into most standard cup holder openings from 2.5” to 3.25”
- Adjustable flywheel base
- Installs easily without tools
- Easily transferred from one vehicle to
another
- Not compatible with adjustable or
oversized vehicle cup holders
- Suitable alternative to the windshield suction mounts that are banned in California and Minnesota
- Patented
View the USER MANUAL for this product for complete specifications and installation instructions. |
|
|
|
|
|
|
|
| Price: $19.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
| |
 |
|
| CM048-2 : 1” Multi-Angle Dashboard or Console Adheisve Mounting Pedestal with Dual T-Tab Mounting Pattern |
|
- Compatible with All Arkon Dual T-Slot holders and adapter plates (sold separately)
- Compatible with Edge Products CS and CTS Evolution tuning programmers (sold separately)
- Ideal for use with any devices that feature Arkon's Dual T-Slot pattern
- Short, 1” tall, versatile mounting pedestal that attaches to any flat dashboard or console surface
- Adjusts to fit any angle
- Adhesive or screw mount installation
- Screws shown are included, but not required for installation. When selecting screw mount installation, consult with a mobile install professional prior to installation. Arkon Resources, Inc. assumes no responsbility of liability for damage to your vehicle
View the USER MANUAL for this product for complete specifications and installation instructions. |
|
|
|
|
|
| Previously: $19.95 |
|
| Sale: $14.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
|
 |
|
| AP032-VSM : VSM 4 Hole AMPS Adapter Mount for Magellan and HP GPS Devices |
|
For use with Vehicle Specific Mounts (VSM) offered by other manufacturers such as Pro.Fit International, Brodit, and Panavise.
ARKON's APGN-VSM Converts the standard 4-Hole AMPS pattern found on vehicle specific mounts to ARKON's Dual T-Slot mounting pattern found on the Magellan and HP portable navigation devices
- Compatible with ALL Magellan Maestro
- Compatible with ALL Magellan RoadMate
- Compatible with any pedestal that uses the 4-Hole AMPS pattern
- Includes AP032 4 Hole AMPS to ARKON Dual T Pattern Adapter Plate
- Metal vehicle specific mount with AMPS pattern not included, sold separately by other manufacturers
- 4 Screws and 4 Nuts included to connect Adapter Plate to 4-Hole AMPS Pattern
- Patented
View the USER MANUAL for this product for complete specifications and installation instructions. |
|
|
|
|
|
|
|
| Price: $7.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
| |
 |
|
| AP013 : Adhesive Disc - Dash or Console Converter Mount for your Windshield Suction Pedestal |
|
ARKON's AP013 adhesive disc, sized at 80mm, transforms 75mm or smaller windshield suction pedestals to function as a dash or console mount. Once applied, the windshield suction cup is installed directly over the flat surface of the disc.
Your windshield suction pedestal can be removed easily. The disc however, is semi-permanent as it uses an adhesive on your dash.
Compatible with most of the windshield pedestals offered by Garmin, TomTom, Magellan, Mio, and other GPS manufacturers.
View the USER MANUAL for this product for complete specifications and installation and removal instructions. |
|
|
|
|
|
|
|
| Price: $4.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
|
 |
|
| GPS-9043K : GPS Accessory - Deluxe GPS Carryall |
|
The problem with most cases or bags is that they only hold the GPS, or the GPS and the car charger. Arkon's GPS Carryall is large enough to hold the GPS, the mount, and the car charger. It also features a convenient shoulder strap for travel.
- Inner compartment sized at 6.5 x 4 x 3”
- Easily holds portable GPS devices having up to 5” screen size
- Features hand carry strap on top and shoulder strap on sides
- Close the GPS Carryall using the zipper and snap buckle
- Convenient belt loop sewn into backside of bag for carrying on your hip
- Inner compartment features mesh pocket with zipper close
- Also suitable for cameras and other portable electronics
|
|
|
|
|
|
|
|
| Price: $14.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
| |
|
|
| |
 |
|
| GPS-9045K : GPS Accessory - Mini Travel Case for Cell Phone or GPS Mount and Car Charger |
|
Conveniently carry your car mount and charger in style with Arkon's GPS-9045K mini travel case. Made of lightweight grey nylon, the mini travel case features a double zipper and a perfectly sized inner compartment for storing your electronic accessories.
- Inner compartment sized at 5.5 x 3.75 x 3.75”
- Perfect fit for your device's car charger and Arkon mount
- Features 2 Slots inside of bag for storage of CF cards or other flat accessories
- Inner compartment features protective padding and dividers
- Also suitable for digital cameras and other portable electronics
|
|
|
|
|
|
|
|
| Price: $14.95 |
|
|
| |
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
|
|
